Journal of Environmental Engineering · 2002 · 37 citations · 16 references
EngineeringChemical EngineeringEnvironmental EngineeringSurface ScienceWaste ManagementWastewater TreatmentAdsorption ProcessesSludge DisposalSludge Resource RecoverySludge TreatmentWaste IncinerationWaste TreatmentAdsorption CapacityCompetitive Adsorption KineticsEquilibriumIonic StrengthIonic Strength EffectsKinetic Data AnalysisNickel RemovalPh Effects On Metal Removal
This work examines the adsorption of Ni(II) onto sludge–ash, a waste produced from a fluidized bed incinerator combusted primarily with biosolids. Results of kinetic experiments showed that the adsorption was rapid. The kinetic adsorption data can be well described by an empirical modified Freundlich equation. The rate of adsorption decreased with either increasing surface loading and ionic strength or decreasing solution pH. The results of equilibrium studies showed that the solution pH was the key factor affecting the adsorption. The modified Langmuir model fit revealed that the hydrogen ion acts as a competitive inhibitor for the adsorption of Ni onto ash. The maximum adsorption capacity for Ni is 5.41 μmol/g. Experimental results indicate that the adsorption is favorable at higher temperature. Thermodynamic adsorption parameters for ΔG°,ΔH°, and ΔS° are −7.41 kcal/mol, 7.25 kcal/mol, and 48.9 cal/mol K, respectively.
16