Biotechnology & Biotechnological Equipment · 2015 · 20 citations · 28 references
DentistryDental Biomaterials ScienceImplant DentistryDental MaterialsMechanical Behavior Of MaterialsMechanical Properties Of Dental MaterialsBone MechanicsImplant BiomechanicsImplant DesignImplant MaterialsLoading ProtocolsBiomechanics Of Dental ImplantsDental Implant BiomechanicsImplant Material MechanicsImplant Stress DistributionStress DistributionVertical LoadingVertical Stress DistributionZirconia Implants
The paper presents three-dimensional (3D) finite element models of straight and angled implants and their zirconium-based superstructures. The key objective was to compare the influence of different loading conditions on the stress distribution of straight and angled implants and the zirconia frameworks. 3D finite element straight- and angled-implant models of a mandibular section of bone with missing second molars and their zirconium-based superstructures were used. The straight and angled implants were 4.7 × 13-mm screw-type dental implant systems. Total loads of 300 N were applied in a vertical direction and in an oblique (30° to the vertical) direction buccolingually. Maximum and minimum von Mises stress values of the titanium structures (abutment and implant body) and zirconia frameworks were calculated. When the two groups were examined, the highest stress value was in the zirconia framework of the angled implant-supported model with an oblique loading force (731.46 MPa). The lowest stress values were concentrated in the straight implant-supported model. Thus, the stress values in the angled implant-supported crown were higher than those in the straight implant-supported model. Stress values with oblique loading forces were higher than the values with vertical loading forces. The highest stress value in the zirconia framework was similar to the ultimate strength of the zirconia.
28
Daniel Buser, Regina Mericske‐Stern, Jean Pierre Bernard et al. · Clinical Oral Implants Research · 1997 · 1.3K citations
L Baggi, Ilaria Cappelloni, M Di Girolamo et al. · Journal of Prosthetic Dentistry · 2008 · 530 citations · Full text
Tilting of posterior mandibular and maxillary implants for improved prosthesis support.
Leonard Krekmanov, M. Kahn, Bo Rangert et al. · PubMed · 2000 · 445 citations
Dental Materials and Their Selection
Mary P. Walker · Journal of Prosthodontics · 2003 · 408 citations
Dentistry, Dental Biomaterials Science, Dental Materials Science +12