Philosophical Magazine Letters · 1995 · 28 citations · 10 references
Natural SciencesMaterials EngineeringMaterials ScienceCondensed Matter PhysicsMetallurgyPhase TransformationsMartensitic TransformationsMicrostructure EvolutionPhase ChangeTransformation MechanismsX-ray CrystallographyX-ray DiffractionCrystalline LamellaeDislocationsEnergy Dispersive X-ray SpectroscopyEnergy-dispersive X-ray SpectroscopyPartial DislocationsPhase FormationPhase Transformation AnalysisShockley Partial Dislocations
Abstract The α → γ phase transformation, which occurs during quenching and produces extremely fine α2-γ lamellae, is discussed in relation to the analysis of the α2-γ interface structure. In a high-resolution image obtained from the growth edge of a γ plate in the α2 matrix, steps that were always found to be (0002)α2 or (111)γ planes high were observed at the α2-γ interface. This indicates that the α → γ phase transformation is performed by the migration of (a/3) 〈1100〉hcp Shockley partial dislocations on alternate 〈1100〉hcp planes to change the stacking sequence AB… to ABC….Chemical analysis by analytical transmission electron microscopy with energy-dispersive X-rays showed that the α2 and γ plates have the same composition, so that the α2→γ phase transformation which occurred during quenching can be interpreted as being composition invariant when these results are taken into consideration, it is suggested that the transformation is marterisitic.
10
High-temperature ordered intermetallic alloys
C.C. Koch, C.T. Liu, N.S. Stoloff · 1985 · 2.1K citations
Natural Sciences, Materials Engineering, Materials Science +17
Materials Research Society Symposium Proceedings
A. Saiani, E. Vey, Anndrea Miller et al. · Research Explorer (The University of Manchester) · 2007 · 1.4K citations
Natural Sciences, Materials Engineering, Materials Science +10