Materials and Corrosion · 1997 · 36 citations · 8 references
Natural SciencesMaterials EngineeringMaterials ScienceCorrosion ScienceMetallic MaterialsMetallurgyAlloysCorrosion MechanismsCorrosion Of SteelsCorrosion-resistant MaterialsHigh-temperature CorrosionSteel MaterialsCorrosion BehaviorCorrosion Of Ferrous AlloysFerritic SteelsLow Alloy SteelsLow-alloy SteelLow-alloy Steel CorrosionMolten Carbonate Fuel CellsSteels
Abstract The corrosion behavior of eight low and high alloy steels was investigated under simulating the conditions at the cathode of a molten carbonate fuel cell at 650°C. Different Li‐containing iron oxides (LiFeO 2 and LiFe 5 O 8 ) were formed in contact with the eutectic (Li, K)‐carbonate melt depending on the Cr‐content of the steel. These oxides show low solubility in the melt and protect the metallic material against further corrosive attack last growing scales of Fe 3 O 4 and LiFe 5 O 8 were observed on the low alloy ferritic steel 10 CrMo 9 10. Higher alloy steels form LiFeO 2 in contact with the melt and mixed Fe‐Cr‐spinels underneath. Steels with Cr‐contents over 20 wt.% Cr form a mixed LiCr 1‐x Fe x O 2 and LiCrO 2 layer in contact with the metal. Marker experiments on the commercial steel 1.4404 (X2 CrNiMo 17 13 2) show that the outer LiFeO 2 layer grows mainly by outward diffusion of iron ions (Fe 3+ ), whereas the inner (Fe,Ni)Cr 2 O 4 spinel layer grows inward. After 500 hours, LiFe 5 O 8 was formed between the spinel and the LiFeO 2 layer, but it had disappeared after several thousand hours of exposure as it was fully transformed to LiFeO 2 . Co‐containing LiFeO 2 was found after 500 hours on the high Co‐containing steel 1.4971 (X12 CrCoNi 21 20), but is not stable after several thousand hours exposure. Co diffuses outward to form a protective LiCoO 2 layer of a few microns in thickness. Protective Cr 2 O 3 layers were not observed on steels with high Cr‐content (≥ 25 wt.% Cr) due to peroxide ions in the melt, which cause oxidation Cr 2 O 3 and flux to chromate, which is highly soluble in the melt. Further quantitative investigations on total corrosion considering the chromate formation have shown that high alloy steels with high amounts of Cr form mainly K 2 CrO 4 .
8
Improvement of molten-carbonate fuel cell (MCFC) lifetime
L. Plomp, J.B.J. Veldhuis, E.F. Sitters et al. · Journal of Power Sources · 1992 · 75 citations
On the Oxygen Electrode in Molten Salts.
H. Flood, K. Motzfeldt, Ernst Finsnes et al. · Acta chemica Scandinavica/Acta chemica Scandinavica. B, Organic chemistry and biochemistry/Acta chemica Scandinavica. A, Physical and inorganic chemistry/Acta chemica Scandinavica. Series B. Organic chemistry and biochemistry/Acta chemica Scandinavica. Series A, Physical and inorganic chemistry · 1952 · 72 citations · Full text