Compressive Behavior of Representative Volume Element Specimens of Lithium-Ion Battery Cells under Different Constrained Conditions

Shin -Jang Sung, Wei‐Jen Lai, Mohammed Yusuf Ali, Jwo Pan, Saeed Barbat

SAE International Journal of Materials and Manufacturing · 2014 · 10 citations · 8 references

Concepts

Abstract

<div class="section abstract"><div class="htmlview paragraph">The compressive behavior of lithium-iron phosphate battery cells is investigated by conducting in-plane constrained compression tests and out-of-plane compression tests of representative volume element (RVE) specimens. The results for cell RVE specimens under in-plane constrained compression tests without pre-strains and with pre-strains in the out-of-plane direction indicate that the load carrying capacity is characterized by the buckling of cell specimens. As the pre-strain increases, the nominal compressive stress-strain curve becomes higher. The nominal stress-strain curves in the out-of-plane direction were also obtained and used to determine the elastic moduli for the elastic buckling analyses of the cell components in the cell RVE specimens with different pre-strains. Based on the elastic buckling analyses for a beam with different lateral constraints due to different pre-strains in the out-of-plane direction, the number of half waves and the buckling stresses were obtained. The results indicate that the number of half waves and the buckling stress increase as the pre-strain increases. The general trends of the numbers of half waves and the buckling stresses are in agreement with those obtained from experiments.</div></div>

References

8