Publication | Closed Access
Characterization of potential donor acceptor pairs for polymer solar cells by ESR, optical, and electrochemical investigations
32
Citations
0
References
2004
Year
Optical MaterialsEngineeringOrganic Solar CellChemistryElectrochemical Band GapPhotovoltaicsPolymersConducting PolymerElectrochemical InvestigationsNew Ppv-ppe CopolymersHybrid MaterialsPolymer ChemistryAbsorption CoefficientMaterials ScienceOptoelectronic MaterialsOrganic SemiconductorOrganic Charge-transfer CompoundElectronic MaterialsPolymer ScienceConjugated PolymerSolar CellsFunctional MaterialsPolymer Solar Cells
In this report new PPV-PPE copolymers <b>DE 69, DE 11</b> were compared with the state of the art materials <b>MDMO-PPV</b> and poly(3-alkylthiophenes) (<b>P3DDT, P3OT</b>). The optical band gap energy of the two copolymers <b>DE 69, DE11</b> is somewhat higher than that one of <b>MDMO-PPV</b>. The electrochemical band gap was found to be lower for <b>DE 69, DE11</b> related to for MDMO-PPV. The absorption coefficient of the new PPV-PPE copolymers is higher than for <b>MDMO-PPV</b> but in the same order of magnitude. Films from composites of <b>MDMO-PPV/PCBM</b> and <b>DE69</b> or <b>DE11</b> with <b>PCBM</b> show a clear photoluminescence quenching effect. At 77 K two kinds of LESR signals were identified, one of polarons (<i>P</i><sup>+.</sup>) and one of radical anions of fullerenes. The LESR results show strong differences in kinetics between the separation and recombination processes of photoexcited charge carriers. The relaxation rates of paramagnetic centers were estimated by microwave power saturation experiments. Photovoltaic devices were prepared under ambient conditions on flexible PET-ITO foils with <b>MDMO-PPV/ PCBM</b> (1:3 wt. %) with η<sub>AM1.5</sub> = 2.4% and <b>DE 69/ PCBM</b> (1:3 wt. %) with η<sub>AM1.5</sub> = 1.75% (A=0.25 cm<sup>2</sup>, P<sub>in</sub> = 100 mW/cm<sup>2</sup>).