Publication | Closed Access
Catalytic reduction of p-nitrophenol over precious metals/highly ordered mesoporous silica
129
Citations
45
References
2013
Year
Materials ScienceChemical EngineeringPrecious MetalsEngineeringCatalytic ApplicationPnp ReductionGreen ChemistryMesoporous SilicaSodium CitrateCatalyst RecyclingCatalysisChemistryCatalyst PreparationCatalytic ProcessHybrid Materials
Precious metals, Au, Pt, and Pd, were successfully deposited on highly ordered mesoporous SBA-15. Two different reduction routes were employed to deposit precious metals: (1) under H2 and (2) using sodium citrate. Samples prepared using sodium citrate exhibit a uniform particle size of 10 nm while samples synthesized under H2 show high dispersion with a particle size of 8 and 20 nm for Pt and Pd, respectively. The surface area and pore volume of the mesoporous SBA-15 were significantly reduced due to the impregnation of the precious metals. Detailed TEM and XPS analyses reveal a uniform distribution of particles with a metallic valence state and no evidence of metallic oxides. The prepared catalysts were used to reduce p-nitrophenol (PNP) into p-aminophenol (PAP) where two trends were observed. The catalytic reduction efficiency for PNP reduction using the catalyst prepared with sodium citrate as a reducing agent is in the order of Au > Pt > Pd with a rate constant of 3.24 × 10−1 s−1 for Au/SBA-15. On the other hand, the catalyst prepared with H2 as a reducing agent showed a reverse trend Pd > Pt > Au with a rate constant of 7.15 × 10−1 s−1 for Pd/SBA-15. The highest catalyst efficiency was observed for the case of Pd/SBA-15 synthesized via the H2 route with a rate constant of 7.15 × 10−1 s−1. Also the reaction rate of Pd/SBA-15 synthesized via the H2 route was 2.2 times higher than that of Au/SBA-15 prepared using the sodium citrate route.
| Year | Citations | |
|---|---|---|
Page 1
Page 1