Industrial & Engineering Chemistry Research · 2006 · 114 citations · 18 references
EngineeringChemical EngineeringMechanical Behavior Of MaterialsPolymer ChemistryPolymer EngineeringBubble DynamicsPolymer FoamsBlowing AgentsBubble GrowthBubble NucleationFoamingFoaming BehaviorFoamsMicrocellular FoamsPressure Drop
In this paper, we undertook an experimental and theoretical analysis of the pressure-drop behaviors of a batch foaming system with a visualization window that was designed for microcellular foaming simulation. A polystyrene (PS)−CO 2 system was used in the experiment and analysis. The maximum pressure-drop rate achievable was 2.5 GPa/s from the designed system. Some experimental simulation results at high pressure-drop rates and at low pressure-drop rates are also discussed. We observed that the application of a higher pressure-drop rate results in a higher cell density (and, thereby, a smaller cell size) for plastic foams. This confirms that the pressure-drop rate is one of the most important parameters to control the cell density of plastic foams. In addition, the results show that the content of the blowing agent (CO 2 ) dissolved into a given polymer has a significant effect on bubble nucleation and growth.
18