Calibration techniques of active BiCMOS mixers

K. Kivekäs, Aarno Pärssinen, Jussi Ryynänen, J. Jussila

IEEE Journal of Solid-State Circuits · 2002 · 63 citations · 13 references

Concepts

TL;DR

This paper presents calibration techniques for downconversion mixers in integrated direct‑conversion receivers, aiming to achieve high even‑order intermodulation rejection and improve I/Q amplitude balance. The authors implement a single‑balanced adjustable mixer in a prototype receiver chip fabricated in 0.35‑µm SiGe BiCMOS, incorporating a low‑noise amplifier, mixers, calibration circuitry, divide‑by‑two circuit, LO buffers, and active baseband filters, and characterize it at 900 MHz. Calibration improves the receiver’s second‑order input intercept point by over 20 dB, achieving a minimum IIP2 of +38 dBm.

Abstract

This paper describes calibration techniques for downconversion mixers used in integrated direct-conversion receivers. A method of achieving a high even-order intermodulation rejection is presented. Using the method presented, the receiver second-order input intercept point (IIP2) can always be improved by more than 20 dB. The minimum achieved receiver IIP2 after calibration is +38 dBm. A technique to enhance the I/Q-amplitude balance between the quadrature channels is also introduced. A single-balanced adjustable mixer is implemented as a part of a prototype direct-conversion receiver. The receiver chip consists of a low-noise amplifier, mixers and calibration circuitry, a divide-by-two circuit, local oscillator (LO) buffers for LO generation, and active baseband filters. The chip is fabricated using a 0.35-/spl mu/m SiGe BiCMOS process and is characterized at 900 MHz.

References

13