Journal of the Chemical Society Faraday Transactions · 1990 · 14 citations · 19 references
Natural SciencesChemical EngineeringChemistryInorganic ChemistrySurface ChemistrySurface ScienceAdsorption ProcessesAluminum OxidesCatalyst CharacterizationMineral ChemistryMineral Surface ChemistrySurface AdsorptionAdsorption IsothermsAdsorption On Oxide SurfacesAdsorption On OxidesAdsorption PhenomenaAluminaLangmuir Adsorption ModelMetal AdsorptionSurface Adsorption Isotherms
The adsorption isotherms of Zn2+ and/or Co2+ ions from aqueous solutions on γ-Al2O3 have been obtained, and analysed by the Langmuir model. The results show that adsorption of both ions occurs predominantly on the same type of site, but alumina exerts a higher electrostatic attraction for Zn2+ than for Co2+ species. In solutions containing both Zn2+ and Co2+ ions the adsorption of Zn2+ was practically unaffected, whereas the adsorption of Co2+ was markedly inhibited and only a small fraction of Co2+ ions, probably as a different complex, was adsorbed. Characterization by X-ray diffraction, diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), and metal-extraction and zeta-potential measurements of the calcined forms of selected samples of the three Co-, Zn- and CoZn-Al2O3 series showed that the adsorbed and occluded Co2+ species at Co loadings below 1.2 wt %(the saturation coverage, derived from the adsorption isotherm) interact strongly with alumina forming a surface spinel. Above the Co saturation coverage both XPS and zeta-potential measurements indicated a significant change in Co dispersion, suggesting formation of small Co3O4 clusters, which, according to the DRS results, is consistent with a high relative proportion of octahedrally coordinated Co. In contrast, the Zn species in the Zn-Al2O3 calcined samples appeared uniformly dispersed, predominantly as a surface spinel, throughout the explored composition range. Results of selective extraction of Zn by HCl and ammonia solutions for samples calcined at different temperatures showed clearly that the non-adsorbed Zn filling the pores upon calcination at 623 K gives rise to ZnO, and then at 823 K undergoes a solid-state reaction with the free alumina surface.
19