Journal of the American Ceramic Society · 2005 · 84 citations · 20 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsMechanical Behavior Of MaterialsCeramic CompositesCeramic Matrix CompositesComposite MaterialsDefects In CeramicsFracture ToughnessStructural CeramicsAlumina CeramicsAlumina-based Ceramic CompositesCeramic Fracture ToughnessFracture Toughness Of Ceramic CompositesMechanical ReliabilityResidual Stress In Ceramic CompositesSurface DamageSurface Residual Stress
A design and processing approach to fabricate ceramic laminates with high mechanical reliability, i.e., high failure resistance, limited strength scatter, and increased damage tolerance is presented in this paper. Different ceramic layers are stacked together to develop a specific residual stress profile after sintering. By changing the composition of the laminae and the composite architecture it is possible to produce a material with predefined failure stress which can be evaluated from the fracture toughness curve correlated to the residual stresses. In addition, by tailoring the fracture toughness curve, surface defects can be forced to grow in a stable way before reaching the critical condition, thus obtaining a unique‐value strength ceramic material. Laminates composed of alumina/mullite composite layers are designed and created in this work by the implementation of the proposed approach. The material obtained shows a “constant” strength of 456 MPa (standard deviation <7%) even when large surface damage is produced by Vickers indentation.
20
A simple way to make tough ceramics
W.J. Clegg, K. Kendall, Neil McN. Alford et al. · Nature · 1990 · 838 citations
Natural Sciences, Materials Engineering, Materials Science +13
Laminar Ceramics That Exhibit a Threshold Strength
Masaru P. Rao, Antonio Javier Sánchez‐Herencia, Glenn E. Beltz et al. · Science · 1999 · 247 citations
Natural Sciences, Materials Engineering, Materials Science +17