Oxide-Relief and Zn-Diffusion 850-nm Vertical-Cavity Surface-Emitting Lasers With Extremely Low Energy-to-Data-Rate Ratios for 40 Gbit/s Operations

Abstract

We demonstrate novel structures of a vertical-cavity surface-emitting laser (VCSEL) for high-speed (~40 Gbit/s) operation with ultralow power consumption performance. Downscaling the size of oxide aperture of VCSELs is one of the most effective ways to reduce the power consumption during high-speed operation. However, such miniaturized oxide apertures (~2 μm diameter) in VCSELs will result in a large differential resistance, optical single-mode output, and a small maximum output power (<; 1 mW). These characteristics seriously limit the maximum electrical-to-optical (E-O) bandwidth and device reliability. By the use of the oxide-relief and Zn-diffusion techniques in our demonstrated 850-nm VCSELs, we can not only release the burden imposed on downscaling the current-confined aperture for high speed with low-power consumption performance, but can also manipulate the number of optical modes inside the cavity to maximize the E-O bandwidth and product of bit-rate transmission distance in an OM4 fiber. State-of-the-art dynamic performances at both room temperature and 85 °C operations can be achieved by the use of our device. These include extremely high D-factors (~13.5 GHz/mA <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">1/2</sup> ), as well as record-low energy-to-data ratios (EDR: 140 fJ/bit) at 34 Gbit/s operation, and error-free transmission over a 0.8-km OM4 multimode fiber with a record-low energy-to-data distance ratio (EDDR: 175.5 fJ/bit.km) at 25 Gbit/s.