Development and Test of JT-60SA Central Solenoid Model Coil

Abstract

A central solenoid (CS) model coil (CSMC) was manufactured by using real manufacturing jigs and procedure to validate the CS manufacturing processes for JT-60SA. The winding accuracy and the temperature control precision during the heat treatment met the requirements. The vacuum pressure impregnation process was also successfully finished. The cold test of the CSMC was performed as a final check of the manufacturing process. The joint resistance, the Ic, and the pressure drop measurements were conducted as the verification test. The results of verification test satisfied the design requirements. These results indicate that the manufacturing processes of the JT-60SA CS has been established. The manufacturing of real CS pancakes just started after finishing the CSMC test.