An investigation of an optical fibre amplifier loop for intra-cavity and ring-down cavity loss measurements

Abstract

We present the design and initial investigation of a fibre optical system which may be used both for intra-cavity and for ring-down measurements of absorption losses. The system consists of a fibre loop containing a length of erbium-doped fibre pumped at 980 nm, with gain adjustment below or above threshold for the two types of operation. The fibre loop is constructed from standard fibre optical components and includes a micro-optical gas cell. The intended application is for measurement of levels of trace gases which possess near-IR absorption lines within the gain bandwidth of the erbium fibre amplifier. We discuss the key issues involved in operation of the system and the level of sensitivity required. Our initial experimental investigations have demonstrated that ring-down times of several microseconds can be obtained, which can be altered through adjustment of the attenuation or gain factor of the loop. Gain control is one of the most important issues and we explain how this may be achieved.