Crystallization Behavior of Amorphous Poly(<scp>l</scp>-Lactide)

Yoshitsugu Ohtani, Kenji Okumura, Akiyoshi Kawaguchi

Journal of Macromolecular Science Part B · 2003 · 78 citations · 20 references

Concepts

Abstract

Amorphous poly(l-lactide) (PLLA) was annealed in two different ways: amorphous samples were heated at a given temperature to induce crystallization (one-step annealing); and amorphous samples were first crystallized at a low temperature and subsequently annealed at a higher temperature than the crystallization temperature. Samples thus prepared were measured by DSC. The original amorphous sample exhibited an exothermic peak at about 100°C (exothermic peak I), an exothermic peak just below the melting point (exothermic peak II), and an endothermic peak when it was melted. Exothermic peak I was caused by cold crystallization. When the melting points of PLLA samples, heat-treated in various ways, were plotted as a function of annealing temperature, there was discontinuity at about 120°C. From analyses of wide-angle X-ray diffraction patterns, it was found that when amorphous PLLA was crystallized at a temperature below 120°C, crystallites of the β-form formed, and when annealed at a temperature above 120°C, crystallites of the α-form grew. Thus, exothermic peak I was attributed to cold crystallization of the β-form, and peak II was caused by the phase transition of the β-form to a more stable form.

References

20