Bulletin of the Chemical Society of Japan · 1976 · 34 citations · 1 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsInorganic ChemistryAluminum OxidesChalcogenide GlassesCrystalline MaterialsCrystallization ProcessesGlass MaterialsPhosphate MineralsCrystal Chemistry Of PhosphatesCrystallization In GlassGlass CompositionGlass FormationPhosphate Glasses
Abstract Glass formation and crystallization were investigated in two types of three-component systems, M2O–Al2O3–P2O5 (M=Li, Na, and K) and MO–Al2O3–P2O5 (M=Mg, Ca, and Ba). In the Li2O–Al2O3–P2O5 and MO–Al2O3–P2O5 systems, wide regions of glass formation were found in compositions containing more than 50 mol% of P2O5. In the Na2O–Al2O3–P2O5 and K2O–Al2O3–P2O5 systems, the two peaks in Al2O3 content were found in the regions of glass formation corresponding to about 35 and 65 mol% of P2O5. In the devitrified products of the glasses with 60 and 70 mol% of P2O5, AlPO4, Al(PO3)3, and alkaline earth metaphosphate (in the MO–Al2O3–P2O5 system) were found by X-ray powder diffractometry. The crystalline phases in the samples obtained as mixtures of glass and crystal consisted of AlPO4 in the composition containing 60 mol% of P2O5, while those with a P2O5 composition of 70 mol% consisted of Al(PO3)3. By heating those samples at 700–900 °C, the X-ray diffractions of AlPO4 and Al(PO3)3 were intensified. On the other hand, in the samples with 37.5, 40, and 50 mol% of P2O5, all the crystalline phases consisted of AlPO4, and the intensities of these X-ray diffractions decreased after the samples were heated at 600–700 °C. Thus, there is a marked structural difference between the two peak-regions in the Na2O–Al2O3–P2O5 and K2O–Al2O3–P2O5 systems.
1
Estimation of Sodium Triphosphate
Russell Bell, A. R. Wreath, William Curless · Analytical Chemistry · 1952 · 12 citations