Science and Technology of Nuclear Installations · 2009 · 14 citations · 10 references
EngineeringNuclear EngineeringPhysicsHeat TransferThermal AnalysisTransport PhenomenaCondensation Heat TransferHeat Transfer In ReactorsHeat Transfer ModelingProcess SimulationReactor KineticsReactor ModelingCondensation Heat Transfer In ReactorsCoupled Mass TransferFilm EvaporationMass Transfer In ReactorsMass Transfer MechanismsMass Transport PhenomenaReactor Thermal-hydraulic ModelingThermal-hydraulics
The paper summarizes the lesson learned from theoretical and experimental activities performed at the University of Pisa, Pisa, Italy, in past decades in order to develop a general methodology of analysis of heat and mass transfer phenomena of interest for nuclear reactor applications. An overview of previously published results is proposed, highlighting the rationale at the basis of the performed work and its relevant conclusions. Experimental data from different sources provided information for model development and assessment. They include condensation experiments performed at SIET (Piacenza, Italy) on the PANTHERS prototypical PCCS module, falling film evaporation tests for simulating AP600‐like outer shell spraying conditions, performed at the University of Pisa, experimental data concerning condensation on finned tubes, collected by CISE (Piacenza, Italy) in the frame of the INCON EU Project, and experimental tests performed in the CONAN experimental facility installed at the University of Pisa. The experience gained in these activities is critically reviewed and discussed to highlight the relevant obtained conclusions and the perspectives for future work.
10