Industrial & Engineering Chemistry Research · 2013 · 181 citations · 60 references
EngineeringChemical EngineeringEnvironmental EngineeringEnvironmental RemediationWastewater TreatmentWater TreatmentAdsorption ProcessesAdsorptive SeparationsHeavy Metal RemediationHeavy Metal RemovalHydrogelsMagnetic SeparationAdsorbent CapacityAdsorbent CharacterizationAdsorptive TreatmentChitosan HydrogelsChromium RemediationEquilibriumLangmuir Adsorption ModelPseudo-second-order Kinetics
The magnetic chitosan–iron(III) hydrogel (MCh-Fe) was synthesized and characterized by SEM, TG, XRD, and FT-IR and used to remove toxic chromium(VI) (Cr VI ) from aqueous solution. The adsorption of Cr VI onto the MCh-Fe adsorbent was fast and could reach equilibrium in less than 30 min. The adsorption was well described by the pseudo-second-order rate model. The equilibrium isotherm was better matched with the Langmuir model. The adsorption of Cr VI onto MCh-Fe was an endothermic and spontaneous process. The loading capacity of Cr VI on the adsorbent remained at a high level even after five cycles, showing that MCh-Fe can be used for repeated Cr VI removal. Column adsorption results indicated that below 0.5 mg L –1 Cr VI was found in the effluent up to about 30 and 350 bed volumes for two wastewaters containing 115.0 and 5.6 mg L –1 Cr VI, respectively. The Cr VI removal mechanism of MCh-Fe was also investigated.
60
Thermogravimetric and FTIR studies of chitosan blends
A. Pawlak, Maria Mucha · Thermochimica Acta · 2003 · 914 citations
Zeid A. ALOthman, Mu. Naushad · Chemical Engineering Journal · 2012 · 739 citations
Engineering, Chemical Engineering, Environmental Engineering +17
Vinod Kumar Gupta, Arshi Rastogi, Arunima Nayak · Journal of Colloid and Interface Science · 2009 · 640 citations
Engineering, Chemical Engineering, Environmental Engineering +16