Geosynthetic Clay Liners Permeated with Chemical Solutions and Leachates

Janice L. Ruhl, David E. Daniel

Journal of Geotechnical and Geoenvironmental Engineering · 1997 · 239 citations · 8 references

Concepts

TL;DR

Five GCLs were tested for hydraulic conductivity with seven permeants under three hydration conditions. Hydration condition mattered most, with water as the first wetting liquid yielding the lowest conductivities; GCLs showed high conductivity when permeated with calcium‑rich MSW leachate, strong acid, or strong base, but maintained low conductivities (1 × 10⁻⁸–10⁻¹⁰ cm/s) when permeated with hazardous waste leachate, real MSW leachate, or fly ash leachate, and those with contaminant‑resistant bentonite performed better than regular bentonite for some liquids.

Abstract

Hydraulic conductivity tests were performed on five geosynthetic clay liners (GCLs) using seven permeant liquids and three conditions of hydration. The condition of hydration was found to be very important: much lower hydraulic conductivity generally resulted when the first wetting liquid was water rather than the chemical solution or leachate. The GCLs had a high hydraulic conductivity when permeated directly with: (1) simulated municipal solid waste (MSW) leachate that was rich in calcium; (2) a strong acid solution; or (3) a strong base solution. The GCLs maintained low hydraulic conductivity (1 × 10−8 to 1 × 10−10 cm/s) when they were permeated with (1) simulated hazardous waste (HW) leachate; (2) real MSW leachate; or (3) simulated fly ash leachate. GCLs containing contaminant-resistant bentonite maintained a lower hydraulic conductivity than GCLs that contained regular bentonite for some but not all permeant liquids.

References

8