Surface and Interface Analysis · 2004 · 79 citations · 20 references
Natural SciencesMaterials EngineeringMaterials ScienceMetallic MaterialsMetallurgySurface ScienceAluminum OxidesCoating ProcessesCoatingsConversion CoatingsMetalsSurface CoatingsAluminum-containing AlloysCeramic CoatingsCerium-based Conversion CoatingsInduction PeriodRare Earth Conversion CoatingsRutherford Backscattering Spectrometry
Abstract The deposition of Ce‐based conversion coatings onto 2024‐T3 Al alloy sheet was studied using Rutherford backscattering spectroscopy, scanning electron microscopy, Auger electron spectroscopy, x‐ray photoelectron spectroscopy and atomic force microscopy. The Al sheet was pretreated with an alkaline clean followed by treatment in a Ce(IV) and H 2 SO 4 ‐based desmutter. The Ce(IV)‐based conversion coating solution contained 0.1 M CeCl 3 ·7H 2 O and 3% H 2 O 2 and was acidified to pH 1.9 with HCl. Upon immersion, there was an induction period that included activation followed by aluminium oxide growth over the matrix and cerium oxide deposition onto cathodic intermetallic particles and along rolling marks on the surface. After the induction period cerium oxide deposited generally across the whole surface and thickened. The strongest anodic sites initially were adjacent to the intermetallic cathodes and resulted in aluminium dissolution but also oxide thickening. Copyright © 2004 John Wiley & Sons, Ltd.
20
Characterization of Pd/γ-alumina catalysts containing ceria
J.Z. Shyu, K. Otto, William L. Watkins et al. · Journal of Catalysis · 1988 · 295 citations
Natural Sciences, Chemical Engineering, Materials Science +12