IEEE Transactions on Microwave Theory and Techniques · 2012 · 64 citations · 17 references
EngineeringElectrical EngineeringElectronic MaterialsMetallic MaterialsMicrowave EngineeringDielectricsMicrowave FiltersMicrowave Integrated CircuitsMicrowave MaterialsMicrowave ResonatorsMicrowave System DesignCombline FiltersDielectric Resonator FiltersDielectric ResonatorsDual-mode FiltersFilter DesignFilter LoadingFiltersFrequency Tuning
This paper presents a novel dielectric resonator filter exploiting dual TM <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">11</sub> degenerate modes. The dielectric rod resonators are short circuited on the top and bottom surfaces to the metallic cavity. The dual-mode cavities can be conveniently arranged in many practical coupling configurations. Through-holes in height direction are made in each of the dielectric rods for the frequency tuning and coupling screws. All the coupling elements, including inter-cavity coupling elements, are accessible from the top of the filter cavity. This planar coupling configuration is very attractive for composing a diplexer or a parallel multifilter assembly using the proposed filter structure. To demonstrate the new filter technology, two eight-pole filters with cross-couplings for UMTS band are prototyped and tested. It has been experimentally shown that as compared to a coaxial combline filter with a similar unloaded <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">Q</i> , the proposed dual-mode filter can save filter volume by more than 50%. Moreover, a simple method that can effectively suppress the lower band spurious mode is also presented.
17
Filter technologies for wireless base stations
Raafat R. Mansour · IEEE Microwave Magazine · 2004 · 143 citations