Physics of the Solid State · 2005 · 41 citations · 34 references
Natural SciencesMaterials EngineeringMaterials ScienceSurface EngineeringSurface ScienceThin FilmsCoating TechnologyCoatingsMetalsSurface CoatingsThin-film DepositionThin-film MaterialsCoating Deposition MechanismsMagnetron SputteringSelf-propagating High-temperature SynthesisSputteringThin-film CoatingsTitanium Nitride Coatings
Transmission and scanning electron microscopy, x-ray phase analysis, x-ray photoelectron spectroscopy, and atomic-force microscopy were used to study the structure and surface topography of Ti-B-N, Ti-Cr-B-(N), and Cr-B-(N) thin films. Physical, mechanical, and tribological characteristics of coatings were comparatively analyzed, including determination of the hardness, elastic modulus, elastic recovery, critical load, friction coefficient, and wear rate. It was shown that Ti-B-N and Ti-Cr-B-N coatings are superior to conventional TiN-and Ti-C-N-based coatings in terms of their physicomechanical and tribological properties. Ti-B-N and Ti-Cr-B-N coatings deposited under optimum conditions were characterized, accordingly, by a hardness of 31–34 and 40–47 GPa, an average elastic modulus of 378 and 506 GPa, a friction coefficient of 0.49–0.60 and 0.45–0.52, a dry-wear rate of (3.4–4.6) × 10 −7 and (6.0–6.8) × 10 −7 mm 3 N −1 m −1 , and a largest critical load of 50 and 22 N. Features in the determination of the physicomechanical properties of films during nanoindentation and their wear properties are discussed.
34