AIAA Journal · 1974 · 25 citations · 14 references
Natural SciencesMechanical EngineeringPhysicsFluid DynamicsFluid MechanicsPlasma PhysicsShock ResponseShock WavesFlow UniformityNonlinear Partial Differential EquationsPetnShock DynamicsShock Tube FlowShock Tube KineticsShock-tube DynamicsStoichiometric Mixtures
Implosions were used to raise the pressure and temperature of a driver gas to extreme values. Strong planar shock waves were thereby generated. A theoretical and experimental study was conducted on the performance of a 2.54-cm-diam shock tube driven by a 20-cm-diam hemispherical implosion driver. The analytical performance of the shock tube was predicted by numerically solving the set of governing nonlinear partial differential equations including appropriate loss mechanisms in the different regimes of the flow. The actual performance of the shock tube was determined experimentally by monitoring the shock velocity, flow uniformity, and test time for different driver conditions. These included stoichiometric hydrogen-oxygen mixtures with and without a PETN explosive liner. Planar shock waves were produced up to 11 km/sec without PETN and up to 19 km/sec with the addition of only 113 g of PETN explosive. Uniform test times of about 2-1 / sec were available at a distance of 33 m from the diaphragm (where the shock velocities were now 9 and 14 km/sec).
14
Journal of the Optical Society of America · 1961 · 2.3K citations
Test Time in Low-Pressure Shock Tubes
Harold Mirels · The Physics of Fluids · 1963 · 340 citations
Shock tube test time limitation due to turbulentwall boundary layer
Harold Mirels · AIAA Journal · 1964 · 237 citations · Full text