Application of a Portable Immunosensor To Detect the Explosives TNT and RDX in Groundwater Samples

Abstract

In the summer of 1995, the EPA conducted a performance evaluation of several commercially available test kits and two prototype biosensor devices to determine if any of these technologies were feasible as an alternative to the standard EPA SW-846 Method 8330 test for explosives in aqueous samples. These on-site assays offer potential advantages in cost, assay time, and convenience over the traditional analysis via high-performance liquid chroma tography (HPLC). The continuous flow immunosensor (CFI) was one of the biosensors participating in this trial, which took place at two Superfund sites located on military bases. The CFI uses a small column filled with plastic beads containing immobilized antibodies against the explosive being assayed and a fluorescent dye-labeled explosive analog. Detection occurs when the native explosive in the sample is swept into the column and displaces some of the dye-labeled analog, which is quantified via a fluorometer. Results from these tests showed that the CFI could produce data comparable to HPLC with no significant problems with cross-reactivity of the antibodies against other explosives or their breakdown products.