Journal of the American Ceramic Society · 2011 · 48 citations · 18 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsThermal AnalysisChalcogenide GlassesCrystallization ProcessesGlass MaterialsThermal Properties Of CeramicsControlled CrystallizationCrystallizationCrystallization BehaviorCrystallization In GlassEmission SpectraGlass-ceramicsGlass-forming AbilityHeat Treatment Effects
The Ce 3+ ‐doped Y 2 O 3 –Al 2 O 3 –SiO 2 ( YAS ) bulk glasses with low SiO 2 (≤40 mol%) were prepared by flame spray‐quench method and hot press sintering. YAG nanoglass‐ceramics were derived from YAS bulk glass by a controlled crystallization. The differential thermal analysis ( DTA ) results showed that the glass‐forming ability of YAS system was strongly dependent on SiO 2 content and the supercooling degree required for forming YAS glass increased with the decrease of SiO 2 content. The YAS glass compositions had been extended to low SiO 2 phase region (10–40 mol%) by flame spray‐quench method. The study of crystallization process showed that glass matrixes experienced initially a phase‐separation followed by crystallization during the heat treatment. The phase‐separated grains (100–300 nm) that were composed of YAG nanocrystallites precipitated in the glass matrix. And the intensity of emission spectra increased with the decreasing SiO 2 content.
18
Bulk glasses and ultrahard nanoceramics based on alumina and rare-earth oxides
Anatoly Rosenflanz, Matthew H. Frey, B. Endres et al. · Nature · 2004 · 258 citations
Natural Sciences, Materials Engineering, Materials Science +16
Uwe Kolitsch, H.J. Seifert, Thomas Ludwig et al. · Journal of materials research/Pratt's guide to venture capital sources · 1999 · 156 citations
YAG glass-ceramic phosphor for white LED (I): background and development
Shunsuke Fujita, Satoru Yoshihara, Akihiko Sakamoto et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 2005 · 145 citations
Natural Sciences, Materials Engineering, Materials Science +17