Journal of Materials Research and Technology · 2014 · 65 citations · 22 references
EngineeringManufacturing EngineeringMaterials EngineeringComputer-aided DesignFinite Element AnalysisMechanical Behavior Of MaterialsForm DevelopmentForming ProcessesMetal FormingSheet Metal FabricationSheet Metal WorkSteel MaterialsFinite Element Modeling Of Forming ProcessesFormabilityIncremental Sheet FormingSheet Metal FormingSteel FormingThickness DistributionThinning
This paper focuses on the formability and thickness distribution in incremental sheet forming (ISF) of extra-deep drawing steel (EDD). In ISF, the formability of the material is primarily measured by the maximum formable wall angle and maximum allowable thinning. The maximum wall angle is generally obtained by forming frustum of cones and square pyramids having different wall angles till fracture, which requires a large number of experiments. Therefore in the present study, a continuously varying wall angle conical frustum (VWACF) was used to predict the maximum wall angle to minimize the number of experiments. VWACF is generated using circular, parabolic, elliptical and exponential generatrices. In order to get the maximum allowable thinning, the thickness of the formed geometry has been measured at various points along the depth. In addition, the thickness distribution has been computed theoretically based on the sine law and also using finite element code LS-DYNA. Theoretical and simulated thickness values have been compared with measured thickness values. It was found from the results that the finite element model was more accurate than theoretical model in predicting thickness distribution.
22
Journal of the Franklin Institute · 1962 · 4.4K citations
Asymmetric Single Point Incremental Forming of Sheet Metal
J. Jeswiet, F. Micari, G. Hirt et al. · CIRP Annals · 2005 · 1.1K citations
Engineering, Manufacturing Engineering, Materials Engineering +14