Energy & Fuels · 1999 · 59 citations · 7 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsThermal AnalysisMaterial TestingMechanical CharacterizationRock StrengthSinteringThermal Properties Of MaterialsThermomechanical AnalysisAsh CharacterizationCompressive StrengthCompressive Strength DevelopmentCompressive Strength TestingSintering BehaviorStrength DevelopmentThermal ConductivityThermal Conductivity Measurements
This paper presents a comparison of techniques that can be used to obtain the sintering temperature of coal ash. These techniques are thermal conductivity analysis (TCA), thermomechanical analysis (TMA), the compressive strength test (CS), and a proposed new technique called the pressure-drop technique. Generally, the results from these four techniques compare well and showed sintering temperatures in the range of 600−1000 °C. These temperatures reflect the onset of strength development in coal ash deposits. An analysis of the results indicates the compressive strength and thermal conductivity techniques are believed to overestimate the sintering temperature of coal ash as measurements were conducted at temperature intervals and these measurements depend on the treatment time. Thermomechanical analysis and pressure-drop techniques are believed to provide a more accurate indication of the sintering temperature due to the constant monitoring of ash structural changes and the inherent sensitivity of the methods to structural changes.
7
Mineral Impurities in Coal Combustion
D. Chandra · Journal of the Geological Society of India · 1986 · 374 citations
Sintering mechanisms of FBC ashes
Bengt‐Johan Skrifvars, Mikko Hupa, Rainer Backman et al. · Fuel · 1994 · 137 citations
Natural Sciences, Materials Engineering, Materials Science +9