Acta Orthopaedica · 2010 · 12 citations · 21 references
MedicineOrthopaedic SurgeryOrthopedic SurgeryBiomechanicsOrthopaedic BiomaterialsOrthopedic BiomechanicsBone BiomechanicsBone CementsBone MechanicsFixation BiomechanicsHip BiomechanicsImplant BiomechanicsBone-implant InterfaceCement-implant InterfaceImplant StabilityImplant-bone InteractionImplant-bone Interface AnalysisInterface MicromotionMicromechanicsMicromotion At The Bone-implant Interface
BACKGROUND AND PURPOSE: Despite the longstanding use of micromotion as a measure of implant stability, direct measurement of the micromechanics of implant/bone interfaces from en bloc human retrievals has not been performed. The purpose of this study was to determine the stem-cement and cement-bone micromechanics of functionally loaded, en-bloc retrieved, cemented femoral hip components. METHODS: 11 fresh frozen proximal femurs with cemented implants were retrieved at autopsy. Specimens were sectioned transversely into 10-mm slabs and fixed to a loading device where functional torsional loads were applied to the stem. A digital image correlation technique was used to document micromotions at stem-cement and cement-bone interfaces during loading. RESULTS: There was a wide range of responses with stem-cement micromotions ranging from 0.0006 mm to 0.83 mm (mean 0.17 mm, SD 0.29) and cement-bone micromotions ranging from 0.0022 mm to 0.73 mm (mean 0.092 mm, SD 0.22). There was a strong (linear-log) inverse correlation between apposition fraction and micromotion at the stem-cement interface (r(2) = 0.71, p < 0.001). There was a strong inverse log-log correlation between apposition fraction at the cement-bone interface and micromotion (r(2) = 0.85, p < 0.001). Components that were radiographically well-fixed had a relatively narrow range of micromotions at the stem-cement (0.0006-0.057 mm) and cement-bone (0.0022-0.029 mm) interfaces. INTERPRETATION: Minimizing gaps at the stem-cement interface and encouraging bony apposition at the cement-bone interface would be clinically desirable. The cement-bone interface does not act as a bonded interface in actual use, even in radiographically well-fixed components. Rather, the interface is quite compliant, with sliding and opening motions between the cement and bone surfaces.
21
Kjeld Søballé, Ebbe Stender Hansen, Helle B.‐Rasmussen et al. · Journal of Orthopaedic Research® · 1992 · 510 citations · Full text