Nanotechnology · 2007 · 19 citations · 14 references
EngineeringMaterials EngineeringMaterials ScienceNanomaterialsNanotechnologySensorsCarbon NanotubesForce SensingForce SensorsMechanical MeasurementMechanical SensorsNanotubesCantilever Beam BendingCarbon Nanotube Mechanical PropertiesCarbon Nanotube SensorsDevice FabricationMechanical Properties Of Carbon NanotubesMechanical Properties Of NanotubesMulti-walled Carbon NanotubesNanomechanical Sensors
We demonstrate the design and calibration of an individual carbon nanotube (CNT) based mechanical force sensor for measuring cell wall compliance. The device fabrication and in situ mechanical characterization were carried out using a micromanipulator inside a scanning electron microscope. This simple device acts as a micro-cantilever beam and consists of a tungsten probe with a CNT attached to its tip, while the other end of the CNT supports a polystyrene microsphere. We have calculated the bending modulus of individual multi-walled carbon nanotubes from the calibration tests. These values agree with those available in the literature.
14
Strength and Breaking Mechanism of Multiwalled Carbon Nanotubes Under Tensile Load
Min-Feng Yu, O. Lourie, Mark J. Dyer et al. · Science · 2000 · 5.3K citations
Natural Sciences, Materials Engineering, Materials Science +17
Optical trapping and manipulation of single cells using infrared laser beams
A. Ashkin, J. M. Dziedzic, Tsuyoshi Yamane · Nature · 1987 · 2.3K citations
Electrostatic Deflections and Electromechanical Resonances of Carbon Nanotubes
P. Poncharal, Zhong Lin Wang, D. Ugarte et al. · Science · 1999 · 1.9K citations
Rotational actuators based on carbon nanotubes
Adam Fennimore, Thomas D. Yuzvinsky, Wei-Qiang Han et al. · Nature · 2003 · 1.2K citations