Safety Ensuring Retinal Prosthesis With Precise Charge Balance and Low Power Consumption

Abstract

Ensuring safe operation of stimulators is the most important issue in neural stimulation. Safety, in terms of stimulators' electrical performances, can be related mainly to two factors; the zero-net charge transfer to tissue and the heat generated by power dissipation at tissue. This paper presents a safety ensuring neuro-stimulator for retinal vision prostheses, featuring precise charge balancing capability and low power consumption, using a 0.35 μm HV (high voltage) CMOS process. Also, the required matching accuracy of the biphasic current pulse for safe stimulation is mathematically derived. Accurate charge balance is achieved by employing a dynamic current mirror at the output of a stimulator. In experiments, using a simple electrode model (a resistor (R) and a capacitor (C) in parallel), the proposed stimulator ensures less than 30 nA DC current flowing into tissue over all stimulation current ranges (32 μA-1 mA), without shorting. With shorting enabled, further reduction is achieved down to 1.5 nA. Low power consumption was achieved by utilising small bias current, sharing of key biasing blocks, and utilising a short duty cycle for stimulation. Less than 30 μW was consumed during stand-by mode, mostly by bias circuitry.