Journal of Applied Physics · 1965 · 15 citations · 2 references
Natural SciencesMaterials EngineeringElectronic MaterialsMetallic MaterialsMetallurgyEpitaxial GrowthMetalsDislocations In Epitaxial FilmsEpitaxial Film GrowthEpitaxial Film MorphologyEpitaxial Growth KineticsEpitaxial Growth MorphologyEpitaxial Thin FilmsEpitaxial Thin-film Growth
Niobium films deposited in vacuum (<5×10−6 Torr) on a (100) face of cleaved MgO were found by electron microscopy to have two types of epitaxial growth, independent of the deposition rate (2 to 120 Å/min). Although the epitaxial films have a very high dislocation density for substrate temperatures below about 500°C, thin films (<250 Å) grown between 500° and 600°C have no crystalline defects observable either by direct electron microscopy or in overlapping Moiré fringe patterns. Perfect (001) epitaxy with [100]Nb// [100]MgO occurred in these thin films for substrate temperatures from 25° to 600°C. Thicker films (>400 Å), have regions of a new orientation which enlarge as the films thicken, until only the new orientation is observed at 1000 Å and thicker. These nuclei are oriented with a {110} plane parallel to the substrate surface and a 〈110〉 direction along a 〈100〉 direction in the substrate. These nuclei grow more rapidly along their 〈110〉 directions. Nucleation of the new structure is discussed briefly. Calculation of the lattice misfits shows that neither of the observed orientations minimizes misfit.
2
Structure and Properties of Thin Films
C. A. Neugebauer, J. B. Newkirk, D. A. Vermilyea et al. · Journal of The Electrochemical Society · 1962 · 525 citations
The study of epitaxy in thin surface films
D. W. Pashley · Advances In Physics · 1956 · 291 citations
Natural Sciences, Materials Engineering, Materials Science +12