Journal of Applied Physics · 2003 · 11 citations · 17 references
Natural SciencesMaterials EngineeringMaterials ScienceMagnetic MaterialsMetallic MaterialsNanomaterialsFerromagnetismGrain Structure FormationMagnetic NanomaterialsMagnetic Properties Of SolidsMagnetism In SolidsNanocompositesAnnealingAnnealing Temperature EffectsCrystallizationMagnetic Materials CharacterizationMagnetic PropertiesMetastable Phase BehaviorMetastable Phase TransformationsNanocrystalline Magnetic Materials
The effect of combined Cu and Ti additions on the magnetic properties and phase transformation behavior of Nd8Fe86B6 nanocomposites prepared by melt spinning have been investigated. For pure ternary Nd8Fe86B6 ribbons, the α–Fe phase precipitates directly from amorphous phase and its grains grow quickly during crystallization. But for Nd8Fe86B6 ribbons with a combined addition of Cu and Ti, the crystallization temperature is increased by about 30 °C and a metastable hexagonal phase with a TbCu7-type structure is formed prior to the α–Fe and Nd2Fe14B phase. When the annealing temperature is increased, a metastable 1:7 phase is decomposed into the α–Fe and Nd2Fe14B phase. At the same time, the growth of α–Fe grains is suppressed and the microstructure becomes more uniform. When the content of Cu reaches 1.0 at. % and that of Ti reaches 0.5 at. %, the optimal magnetic properties Hci=4.8 kOe, σr=110 emu/g, (BH)max=15 MGOe were obtained after annealing at the temperature of 650 °C for 8 min. So, a combined addition of Cu and Ti is very effective in improving the magnetic properties and reducing grain size and, in particular, the size of α–Fe grains.
17
Switching mechanisms in cobalt-phosphorus thin films
P. E. Kelly, K. O’Grady, P.I. Mayo et al. · IEEE Transactions on Magnetics · 1989 · 782 citations