A Function Generator For Electroanalytical Experiments

Duane E. Bartak, Harvey K Hundley, Maarten van Swaay, M. Dale Hawley

Instrumentation Science & Technology · 1972 · 20 citations · 10 references

Concepts

Abstract

ABSTRACT A function generator has been designed and constructed which provides the waveforms required for most controlled-potential and controlled-current electroanalytical experiments. Additional features of the function generator include: 1) independently controlled anodic and cathodic potential steps for chronoamperometric experiments; 2) symmetric or asymmetric current programing for current reversal chronopotentiometric studies; 3) a timing circuit for the control of chronoamperometric and chronopotentiometric experiments; 4) anodic and cathodic voltage limit detectors for automatic reversal of the direction of the electrochemical experiment in cyclic voltammetric and chronopotentiometric studies; 5) electronic switching of all signal generators; and 6) a counting circuit which terminates the experiment after a predetermined number of half cycles has been completed and which then resets the instrument to a prescribed set of initial conditions. When the function generator is combined with an appropriate three-electrode potentiostat-galvanostat, single and double potential step chronoamperometric, chronocoulometric, cyclic voltammetric, square wave voltammetric, cyclic chronopotentiometric, and coulometric experiments can be performed. The function generator should be compatible with all potentiostats and galvanostats which use an adder for the introduction of signal voltages.

References

10