IEE Proceedings - Microwaves Antennas and Propagation · 2005 · 343 citations · 13 references
EngineeringElectrical EngineeringAntennasMicrowave EngineeringWireless CommunicationsAntenna ArraysAntenna GainAntenna MeasurementAntenna RadiationAntenna Radiation PatternsAntenna SimulationAntenna Array SimulationAntenna Radiation EfficiencyElement PatternMimoMimo Antenna ArraysMimo SystemsRadiation EfficiencyScattering
A six‑monopole circular antenna array is studied for MIMO applications. The study demonstrates calculation of embedded element patterns using both analytical modeling and the method of moments. Embedded patterns are used to compute radiation efficiency, correlation, diversity gain, and maximum average MIMO capacity in a rich scattering environment, with theoretical capacity derived by uniformly illuminating the patterns with plane waves and applying Shannon’s formula, and results are validated against reverberation‑chamber measurements. The calculated results agree well with reverberation‑chamber measurements.
A six-monopole circular antenna array for use in a MIMO system is considered. The authors show how to calculate the embedded element patterns, both by classical analytical modeling and by the method of moments. Thereafter, these are used to calculate the radiation efficiency of each embedded element, correlation and diversity gain, as well as the maximum average capacity of the MIMO system when the array is located in a rich scattering environment. The theoretical value for the capacity is obtained by numerically distributing many plane wave sources statistically uniformly over 4π, letting them illuminate the calculated embedded element pattern and using Shannon's capacity formula on the received wave amplitudes. The calculated results are compared with measurement in a reverberation chamber, representing a similar scattering environment. The agreement is good.
13
Kent Rosengren, Per‐Simon Kildal, Charlie Carlsson et al. · Microwave and Optical Technology Letters · 2001 · 156 citations