Combustion in a Porous Medium-Advances and Applications

Dimosthenis Trimis, F. Durst

Combustion Science and Technology · 1996 · 390 citations · 13 references

Concepts

TL;DR

Combustion in inert porous media requires a high Peclet number (>65) to avoid flame quenching, offers efficient heat transfer due to large surface area, allows temperature control and NOx reduction through cooling, and has potential benefits for high‑power, controllable combustion applications. The study aims to design a new combustor‑heat‑exchanger system that leverages combustion in porous media. The authors analyze heat‑transfer mechanisms and propose novel porous‑material designs that enable high power density and improved temperature control in the combustor.

Abstract

Abstract In this paper research and development work of the authors is described, which led to the design of a new combustor-heat exchanger system based on the combustion in porous media. Combustion in inert porous media is possible if the Peclet-number is high enough ( > 65), so that quenching of the flame inside the pores is prohibited. The heat transfer from the combustion zone, to the porous medium itself is very effective because of the very large surface between them. The combustion temperature can be controlled through the porous medium temperature. Prompt and thermal NOx formation, which is temperature dependent, can be controlled by appropriate cooling of the combustion zone. The heat transfer mechanisms in the combustor are discussed and new designs of porous materials are proposed, which allow a high power density and a better control of the temperature level in the combustion zone. The possible application field and the expected benefits of this combustion technique are discussed.

References

13