Volume 2: Coal, Biomass and Alternative Fuels; Combustion and Fuels; Oil and Gas Applications; Cycle Innovations · 2001 · 24 citations · 0 references
EngineeringDesignMechanical EngineeringEnergy SystemsInternal Combustion EnginesSimulation-based DesignEnergy System ModelingFuel CellsFuel SystemsGas Turbine EnginesPower Plant Performance AnalysisDesign Of Energy Conversion SystemsFuel Cell Performance ModelingNatural GasOff-design PerformancePerformance CurvesSystem Part-load PerformanceThermodynamic Performance AnalysisThermodynamic Performance Modeling
In the present study design and off-design performance of a combined SOFC/GT system is investigated. For the evaluation a process simulation tool, Aspen Plus®, was used, completed with a user model representing a SOFC component of planar design. The fuel cell model is a detailed mathematical and physical description thereby avoiding performance curves. A recuperated SOFC/GT system, in size of around 500 kW, with natural gas as fuel, was analysed. Design calculations and sensitivity studies resulted in high electric efficiencies at low pressure ratios. Recent work has focused on off-design calculations investigating different ambient conditions and part load behaviour of this system. Thanks to the small size of the gas turbine, the operational mode is assumed flexible, allowing variation of both rotor speed and of turbine inlet temperature (TIT). In the calculations a simplified compressor map and a choked expander were considered. A high part load efficiency of the system was found exceeding the design point efficiency by as much as three percentage points.