Preparation of 6061Al-Al 2 O 3 MMC's by Stir Casting and Evaluation of Mechanical and Wear Properties

V. Bharath, Madeva Nagaral, V. Auradi, S.A. Kori

Procedia Materials Science · 2014 · 260 citations · 11 references

DOIFull text

Open access

Concepts

TL;DR

Aluminum MMCs are favored in aerospace, automotive, and marine fields for their high strength‑to‑weight ratio and wear resistance. The study aims to synthesize 6061Al/Al₂O₃ composites via stir casting. Reinforcement levels of 6–12 wt % Al₂O₃ were preheated to 200 °C and stirred into molten 6061Al, followed by microstructural, hardness, and tensile testing. Composites show uniform particle distribution, grain refinement, and increased hardness and tensile strength with higher Al₂O₃ content.

Abstract

Aluminum MMCs are preferred to other conventional materials in the fields of aerospace, automotive and marine applications owing to their improved properties like high strength to weight ratio, good wear resistance etc. In the present work an attempt has been made to synthesize metal matrix composite using 6061Al as matrix material reinforced with ceramic Al2O3 particulates using liquid metallurgy route in particular stir casting technique. The addition level of reinforcement is being varied from 6-12wt% in steps of 3wt%. For each composite, reinforcement particles were preheated to a temperature of 200 °C and then dispersed in steps of three into the vortex of molten Al6061 alloy to improve wettability and distribution. Microstructural characterization was carried out for the above prepared composites by taking specimens from central portion of the casting to ensure homogeneous distribution of particles. Hardness and tensile properties of the prepared composite were determined before and after addition of Al2O3 particulates to note the extent of improvement. Microstructural characterization of the composites has revealed fairly uniform distribution and some amount of grain refinement in the specimens. Further, the hardness and tensile properties are higher in case of composites when compared to unreinforced 6061Al matrix, also increasing addition level of reinforcement has resulted in further increase in both hardness and tensile strength.

References

11