Changes of MoS<sub>2</sub> Morphology and the Degree of Co Segregation during the Sulfidation and Deactivation of Commercial Co−Mo/Al<sub>2</sub>O<sub>3</sub> Hydroprocessing Catalysts

Sonja Eijsbouts, L. C. A. van den Oetelaar, Jaap N. Louwen, Rob R. van Puijenbroek, G.C. van Leerdam

Industrial & Engineering Chemistry Research · 2006 · 35 citations · 24 references

Concepts

Abstract

A series of commercial Co−Mo/Al 2 O 3 catalysts, freshly sulfided as well as used in different trickle phase and gas phase reactions, has been characterized by using (scanning) transmission electron microscopy combined with energy dispersive X-ray analysis [(S)TEM−EDX)] and X-ray diffraction (XRD) analysis. While liquid phase sulfided Co−Mo/Al 2 O 3 catalysts contain only MoS 2 single layers, some MoS 2 stacking is observed following H 2 S/H 2 sulfidation. Liquid phase sulfided catalysts as well as catalysts partly sulfided with liquid prior to H 2 S/H 2 sulfidation have higher activities than those sulfided only with H 2 S/H 2 . MoS 2 sintering and Co sulfide segregation are observed in catalysts after commercial use under severe conditions. Compared to what is typically found for Ni−Mo catalysts, metal-rich agglomerates in Co−Mo/Al 2 O 3 catalysts contain more Mo while the Co sulfide crystals are less well developed.

References

24