A direct methanol fuel cell

Orfeo Zerbinati, Ali Mardan, Mark Richter

Journal of Chemical Education · 2002 · 30 citations · 0 references

Concepts

Abstract

The construction of a simple direct methanol fuel cell (DMFC) for didactic purposes is described. Black platinum catalyst was electrolytically deposited on 0.3-mm-diameter nickel–chromium wire at −0.53 V vs RHE (corresponding to 8 mA/cm2 current) for 30 min from 0.02 M H2PtCl6–1 M HCl aqueous solution. Fifty milliliters of this solution allowed platinization of several dozen electrodes. Platinum catalyst was used for both compartments of the fuel cell, whose electrodes had 2 cm2 of active surface, with 1 M sulfuric acid electrolyte. Pseudo salt bridges, made with 2-mm-i.d. plastic tubing, connected anodic to cathodic compartments. The cell was operated by adding 30 mg/mL of methanol at the anode while bubbling air at the cathode. The device produced 0.7 V potential, with 600 µA short-circuit current. Five of these DMFC elements connected in series could supply an electric clock.