Major New Developments in Hydraulic Fracturing, with Documented Reductions in Job Costs and Increases in Normalized Production

M. P. Cleary, Rodger Doyle, E. Y. Teng, Craig Cipolla, D. Nathan Meehan, Leon V. Massaras, Tom Wright

SPE Annual Technical Conference and Exhibition · 1994 · 12 citations · 13 references

Concepts

Abstract

Abstract A number of developments over the past five years have led to dramatic changes in the design and execution of hydraulic fracturing treatments. Five primary new issues are described: convection, tortuosity, rock/fracture (non-linear) response, appropriate use of rheology/flow-rate and permeability variation effects. Consequences include "paradigm shifts", such as inverse relations between appropriate proppant concentration and reservoir permeability. Resulting integrated cost-effective and rewarding methodologies for fracture execution are emphasized and the methodology is illustrated with just a few case-studies, selected to emphasize a variety of technical features as against absolutely optimum execution. Suitable generic implementation and procedures, using greatly reduced fluid volumes, are outlined in sufficiently general form to allow (practically optimum) job execution on any well, particularly in low-permeability reservoirs. The variation between (nominally identical) wells, and the vital role of real-time analysis for on-site execution of adequate jobs, is demonstrated - including unique (but essential) representation of realistic/general physics in the models used to interpret adequate data-sets. The case-studies serve to illustrate the major issues, including many ancillary features involved in proper interpretation of pressure/flow data before, during and after fracturing treatments: it is emphasized here (and in a companion paper for higher permeability) that the proper/sensible combination of all freely-collectible data, including long-term production plots, which should be a natural part of all well operations, usually leads to (practically) unique interpretation of reservoir conditions and job effectiveness: good reservoirs are properly identified and poor-success cannot be so easily ascribed to poor kH. Well procedures and costs are thereby adapted to (optimum) production.

References

13