Superconductor Science and Technology · 1988 · 26 citations · 8 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsCondensed Matter PhysicsCurie TemperatureGrain Structure FormationHigh-temperature MaterialsPowder ProcessingSinteringSuperconducting MaterialsAnnealingCeramic PowdersCo-precipitationCuprate SuperconductorsHigh-temperature SuperconductorsPowder PreparationSintered DensitySuperconducting Critical Temperature
Sub-micrometre-size powders with good homogeneity and reactivity were synthesised by an ethanol-aided co-precipitation method with an oxalic acid precipitant for the superconducting system (Ba2LnCu3O7- delta ; Ln=Y, La, Ho, Dy). Sintering of these powders was carried out in flowing oxygen at temperatures between 900 and 1050 degrees C. A sintered density as high as 98.5% of the theoretical value has been achieved at 1020 degrees C for the Y system and 98% for the La, Dy and Ho systems. A prolonged annealing, as long as three weeks in flowing oxygen, was needed to attain the zero-resistivity critical temperature Tczero=92 K for the highly dense Y system. A sharp superconducting transition, Delta Tc=0.5 K, was then obtained as defined by a 10-90% resistive transition. An exaggerated grain growth was observed at 1000 degrees C and above.
8
The effect of density on critical current and oxygen stoichiometry of YBa2Cu3Ox superconductors
Neil McN. Alford, W.J. Clegg, MP Harmer et al. · Nature · 1988 · 78 citations
SINTER-FORGED YBa<sub>2</sub>Cu<sub>3</sub>O<sub>7-δ</sub>
Q. Robinson, P. Georgopoulos, D. Lynn Johnson et al. · Advanced Ceramic Materials · 1987 · 61 citations