Journal of The Electrochemical Society · 1998 · 101 citations · 0 references
EngineeringChemical EngineeringMaterials ScienceElectrochemical EngineeringMembrane SciencePolymer EngineeringFuel Cell MembranesFuel CellsMembrane EngineeringMembrane MaterialsPolymer MembranesPolymeric MembranesDegradationFuel Cell Membrane DurabilityMembrane DegradationMembrane Electrode AssembliesMembrane PerformancePerfluorosulfonic Acid MembranesPolarizationPolymer Electrolyte Membranes
The high cost of the membrane materials of the currently favored penfluorinated sulfonic acid membranes, such as the Nafion and Dow membranes, is one of the primary obstacles for commercialization of the polymer electrolyte fuel cells- Radiation-grafted, partially fluorinated polymer membranes are considerably less expensive. Three Raipore mem-branes, R-1010, R-4010, and R-5010M were tested directly in 5 cm2 HJ02 fuel cells and examined by Fourier transform infrared spectroscopy Under mild conditions, very good polarization results were obtained for cells with H-lOb and R-40 10 membranes, compared with Nafion 117 membranes using Nafion-impregnated Pt/C electrodes and with elec-trode/membrane assemblies properly hot-pressed. Membrane degradation was observed from infrared measurements after cell operation, but both R-4010 and H-lOb membranes survived long-term stability tests of —1000 h cell operation with reasonably good performance. Further work on both evaluation and modification of the membranes is still required.