The Design of High-Power Traveling-Wave Tubes

M. Chodorow, E. J. Nalos

Proceedings of the IRE · 1956 · 31 citations · 7 references

Concepts

TL;DR

Designing megawatt‑scale traveling‑wave tubes presents significant construction and design challenges. The study aims to improve performance and achieve higher power levels by optimizing beam focusing, coupler design, and operating potentials. The authors describe suitable circuit designs, outlining their advantages and limitations. All‑metal traveling‑wave tubes can dissipate megawatt‑scale powers with good 100‑kV impedance, achieving 300‑kW pulsed output and 3‑dB gain uniformity over 9% bandwidth, though bandwidth is limited to 10–20% compared to klystrons, and experimental results agree with theory.

Abstract

This paper discusses the problems involved in designing traveling-wave tubes in the range of pulsed powers of the order of a megawatt. Suitable circuits are described, together with their advantages and limitations. In general, the all-metal structures described are capable of dissipating high average powers, have good impedances at the required voltages (100-kv range), but at a sacrifice in bandwidth. Nevertheless, this class of traveling-wave tube is useful where bandwidths of 10 to 20 per cent, not obtainable from klystrons of equivalent power outputs, are of interest. The problems of tube construction and tube design are discussed. Results of tests on an experimental model tube are described, showing good agreement with available theory. A gain uniformity of 3 db over a 9 per cent bandwidth, with power outputs of 300 kw pulsed have been obtained using attenuators of nonoptimum design. Better performance should be obtainable with further improvements in beam focusing and coupler design. Higher power levels with same effliciency should be possible, by designing the tube to operate at higher potentials.

References

7