Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsPolymer EngineeringSurface ScienceComposite MaterialsFiber-reinforced CompositesNanocompositesPlasma-surface InteractionsPolymer AdhesionPolymer-matrix CompositesAdhesion ImprovementAdhesion PropertiesCarbon FibersCohesive FailureInterfacial AdhesionPlasma TreatmentPlasma Treatment Of CompositesWater Absorption
Carbon fiber (CF) was modified by air plasma at 30 Pa and 200 W with different treatment times. Interlaminar shear strength (ILSS) of CF/BMI composites suggested that air plasma-treated CFs showed better adhesion with BMI resins than the untreated resins; the maximum increment was 20.4% after plasma treatment for 900 s. Meanwhile, we investigated the surface changes of CFs using X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The results indicated that air plasma treatment roughened the CF surfaces and improved the polarity of CFs by enhancing the polar group content. These changes were believed to be the major reasons for the improvement of interfacial adhesion. The fracture morphology observed by scanning electron microscopy (SEM) indicated that the fracture failure mode changed from adhesive failure to cohesive failure. After boiling in water for 48 h, the water absorption of the composites was low while the ILSS of the composites retained about 90%, which implied that the CF/BMI composites had good humidity resistance properties.
28
Surface characterization of electrochemically oxidized carbon fibers
Zhongren Yue, Wenbo Jiang, L. Wang et al. · Carbon · 1999 · 643 citations
Natural Sciences, Materials Engineering, Materials Science +12
Chemical modification of carbon fiber surfaces
F. Severini, L. Formaro, Mario Pegoraro et al. · Carbon · 2002 · 205 citations
Natural Sciences, Materials Engineering, Materials Science +14
Oxygen plasma modification of pitch-based isotropic carbon fibres
J.P. Boudou, J.I. Paredes, Ana Cuesta et al. · Carbon · 2002 · 202 citations
Natural Sciences, Materials Engineering, Materials Science +13