Chemical Engineering Communications · 1981 · 45 citations · 3 references
EngineeringMechanical EngineeringHeat TransferThermal AnalysisThermodynamicsHeat ConductionHeat Transfer AnalysisHeat Transfer FundamentalsHeat Transfer In FluidsHeat Transfer ModelingPressure Drop PredictionDimensionless QuantitiesFin Spacing EffectsFinsFins Heat TransferFriction FactorFriction Factor CorrelationsPressure DropThermal Performance Of Fins
Heat transfer and pressure drop data are presented for equilateral-triangular pitch tube bundles containing low-finned tubes with fin counts between 0.4 and 1.06 fins per mm. Two types of finned tubes were tested. The first was a 19-mm O.D. integral finned tube with a 1.65-mm fin height and with 0.75 and 1.06 fins per mm. The second was a 31.75-mm O.D. plain tube wound with 3.18-mm soldered fin stock and containing 0.4, 0.71, and 0.98 fins per mm. A new low-fin heat transfer correlation was developed which predicted these new data and additional data from five other sources within an error range from minus 20 percent to plus 31 percent. A necessary dimensionless group required to obtain this accuracy was the fin diameter/fin spacing ratio. Existing friction factor correlations were not successful in predicting these new pressure drop results. A new low-fin friction factor correlation was developed which predicted these data and additional published data within an error range from minus 19 percent to plus 27 percent.
3
W. M. Kays, A. L. London, E. R. G. Eckert · Journal of Applied Mechanics · 1960 · 2.8K citations · Full text