SPE International Symposium and Exhibition on Formation Damage Control · 2014 · 27 citations · 13 references
EngineeringMaterials EngineeringPetroleum EngineeringFluid DynamicsRheologyTransport PhenomenaFluid PropertiesGelsPolymer RheologyViscoelastic BehaviorViscoelastic PropertiesViscous FlowFluid AdditivesFluid Viscosity Effects On Proppant TransportProppant SettlingProppant Settling BehaviorProppant Transport In Viscoelastic FluidsProppant Transport ModelingSurfactant-based Fracturing FluidsViscous Effects
Abstract A new thickening system extends the temperature range of traditional viscoelastic surfactant-based fluids and provides additional downhole benefits. Based on a low-molecular-weight associative polymer, the thickener forms an associative gel with surfactants at elevated temperature. This results in a gel structure that can carry proppant. Recent laboratory work has shown that viscosity alone may not accurately assess proppant transport. Thus, the aim of this paper is to evaluate rotational and oscillatory measurements to determine the viscous and elastic properties of the fluid. In addition, dynamic and static proppant settling tests were conducted using a high pressure/ high-temperature visualization cell to confirm the effect of elastic properties on proppant settling. This combination of measurements can better predict whether the fluid can be applied successfully in the field. Thirty-three different formulae across a wide polymer and surfactant concentration range were examined at temperatures up to 250°F. Also, the effect of other fracturing fluid additives, such as friction reducers and nonemulsifying agents, were examined. Finally, proppant-settling tests were conducted with three proppant types of the same size, but different density and shape at a range of concentrations. Experimental results show that each formula had a certain operating temperature range where the elastic modulus dominates. A polymer-to-surfactant concentration ratio of 1.4 was found to give the widest working temperature range with the highest elastic characteristics; the same range also gives better proppant suspension. At temperatures less than 100°F, the viscous regime was dominant for all tested formulas. However at the same temperature, the elastic modulus increased with shear rate. This gives a good proppant-carrying capacity during dynamic conditions (mixing and injection) with a small pressure drop. The friction-reducing agent was found to have a tendency to reduce the operating temperature range. However, the non-emulsifying agent reduced the effect of the friction reducer and enhanced the performance.
13
Reversible thermothickening of aqueous polymer solutions
Dominique Hourdet, F. L'Alloret, R. Audebert · Polymer · 1994 · 114 citations