Computer aided alignment using Zernike coefficients

Ho Soon Yang, Sung Hee Kim, Yun Woo Lee, Jae Bong Song, Hyug-Gyo Rhee, Hoi-Yoon Lee, Jae-Hyeob Lee, Inwon Lee, Sug-Whan Kim

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 2006 · 10 citations · 0 references

Concepts

TL;DR

High‑performance optical systems, especially those with off‑axis components, are difficult to align, and although Zernike coefficient sensitivities have been used, they only provide accurate results within a limited linear range of misalignment. The authors aim to develop a new alignment method that tolerates larger misalignments during the early stages of alignment. Their approach minimizes a merit function based on Zernike coefficients instead of relying on coefficient sensitivities, and they applied it to a 900 mm diameter Cassegrain collimator. The method proved accurate and flexible, achieving nominal alignment of the secondary mirror with only two trials even when the decenter error exceeded 1 mm.

Abstract

The high performance optical system is generally not easy to align. Particularly, if there are off-axis optical components in the system, the alignment is a very serious problem. Many researchers have reported that using sensitivity of some Zernike coefficients is useful in alignment. However, this method has a weak point in that it generates an accurate result only when the misalignments of component are located within the range where the sensitivities of coefficients are linear to the amount of misalignment. We developed the new method which allows larger misalignment at the early stage of alignment. It is to minimize the merit function of Zernike coefficients rather than to use sensitivities of coefficients. In this paper, we analyzed the cons and pros of conventional alignment method and our own method and demonstrated the accuracy and flexibility of our method by aligning the diameter 900 mm Cassegrain type collimator. Even though there was more than 1 mm decenter error, we could align the secondary mirror to the nominal position with just two trials.