Physical review. B, Condensed matter · 1999 · 22 citations · 28 references
Natural SciencesMaterials SciencePhysicsCondensed Matter PhysicsMaterials PhysicsSolid State PhysicsDeformation MechanismsDislocation MechanicsElastic DeformationMetalsPlastic DeformationStrain HardeningDislocation BehaviorDislocation DensityDislocation PhysicsPlastic Deformation BehaviorShear StressTemperature Dependence Of DeformationTensile DeformationTensile Strain
Doppler-broadening measurements on aluminum and copper polycrystals were performed in situ during tensile tests and temperature-dependent after different degrees of deformation. The sensitivity limit of positrons to defects produced by plastic deformation was found at a resolved shear stress of $\ensuremath{\tau}=(4\ifmmode\pm\else\textpm\fi{}1) \mathrm{MPa}$ in aluminum and $\ensuremath{\tau}=(9\ifmmode\pm\else\textpm\fi{}1) \mathrm{MPa}$ in copper. This corresponds to dislocation densities of $\ensuremath{\varrho}\ensuremath{\approx}2\ensuremath{-}3\ifmmode\times\else\texttimes\fi{}{10}^{12} {\mathrm{m}}^{\ensuremath{-}2}.$ Temperature-dependent Doppler-broadening measurements revealed distinct differences of the positron trapping at dislocations in copper after weak and strong plastic deformation. The transition of the trapping behavior occurred between $\ensuremath{\tau}=20$ and 30 MPa. In aluminum such a dependence of the positron trapping behavior on the degree of deformation was not observed. The measurements were analyzed in terms of a three-state trapping model which provided numerical values for the trapping rates and the binding energy of the positron to dislocation lines.
28
Positron studies of condensed matter
R N West · Advances In Physics · 1973 · 740 citations