Surface and Coatings Technology · 2004 · 139 citations · 15 references
Natural SciencesMaterials EngineeringMaterials ScienceSurface EngineeringSurface ScienceThin FilmsCoatingsPlasma Surface TreatmentPlasma-surface InteractionsPolymer SurfacesSurface CoatingsSurface ModificationAtmospheric PressureAtmospheric Pressure Plasma TreatmentAtmospheric-pressure PlasmasPlasma-assisted CoatingPlasma-enhanced DepositionPlasma-induced DegradationPolypropylene
After the atmospheric pressure plasma treatment of polypropylene (PP) film surface, we measured the contact angle of the surface by using polar solvent (water) and nonpolar solvent (diiodomethane). We also calculated the surface free energy of PP film by using the measured values of contact angles. And then we analyzed the change of the contact angle and surface free energy with respect to the conditions of atmospheric pressure plasma treatment. Upon each condition of atmospheric pressure plasma treatment, the contact angle and surface free energy showed optimum value or leveled off. Through AFM analysis, we also observed the change of surface morphology and roughness before and after plasma treatment. The surface roughness of PP film showed the highest value when the plasma treatment time was 90 s. Finally, we analyzed the change of chemical compositions on the PP film surface through XPS. As the result of analysis, we observed that polar functional groups, such as –CO, –C=O, and –COO were introduced on the PP film surface after atmospheric pressure plasma treatment.
15
Riitta Mahlberg, Heidi Niemi, F. Dénès et al. · International Journal of Adhesion and Adhesives · 1998 · 122 citations
Natural Sciences, Materials Engineering, Materials Science +14