Absorption and hot electron production by high intensity femtosecond uv-laser pulses in solid targets

U. Teubner, I. Uschmann, P. Gibbon, D. Altenbernd, E. Förster, Thomas Feurer, W. Theobald, R. Sauerbrey, Graeme Hirst, M. H. Key,

Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics · 1996 · 76 citations · 47 references

Concepts

Abstract

The interaction of femtosecond ${\mathrm{KrF}}^{\mathrm{*}}$-laser pulses with plasmas of various solid target materials has been studied up to intensities exceeding ${10}^{18}$ W/${\mathrm{cm}}^{2}$. Absorption measurements were performed for p- ands-polarized laser light and as a function of the laser intensity and the angle of incidence. They reveal substantial absorption up to 70% even at intensities in excess of ${10}^{18}$W/${\mathrm{cm}}^{2}$. The results have also been compared to simulations of the absorption at high intensities and, in particular, the peaking of the absorption for large angles of incidence (70\ifmmode^\circ\else\textdegree\fi{}--80\ifmmode^\circ\else\textdegree\fi{}) appears to be consistent with the anomalous skin effect as an important contribution to the total laser pulse absorption. X-ray spectra were measured in the keV range (i.e., between 6.5 and 8.4 \AA{}) and in the soft-x-ray region (i.e., between 25 and 400 \AA{}). The electron density and temperature of the plasma has been estimated by comparison of the experimental spectra with spectral simulations. A systematic study of the hot electrons produced by 248-nm light is presented. Targets consisting of an Al layer on a Si substrate have been used to determine the hot electron yield and the corresponding energy. The K-\ensuremath{\alpha} line emission produced by the hot electrons has been observed as a function of the Al-layer thickness. The measurements have been compared to simulations. The estimated hot electron temperature \ensuremath{\sim}8 keV is considerably lower than that deduced from experiments using lasers of longer wavelength and comparable intensities. Scaling indicates that 0.25-\ensuremath{\mu}m lasers can simultaneously fulfill the requirements for both intensity and hot electron temperature for the ``fast ignitor.'' \textcopyright{} 1996 The American Physical Society.

References

47